LUBE DIEPRODUCT INSTRUCTIONS
Key Part # Description1 87570 Hex Lock Nut 12-282 ✦ Lube Die Body 3 87571 Seal Ring4 87501 Die Lock Ring 7/8-145 87562 Lube Retainer (#1, 2 & 3)5
How can anyone improve on something as basic as a plasticbox? We figured out about eight ways and included them in five dif-ferent sized ammo boxes. R
PRECISIONEERED®RELOADING EQUIPMENTCCI • SPEER • RCBSOUTERS • RAMLINE • ORBEX • FEDERAL7200541/0304We think that we make the very best reloading equipm
SAFETYReloading is an enjoyable and rewarding hobby that is easily con-ducted with safety. But carelessness or negligence can make reloadinghazardous.
• Never attempt to seat or reseat a primer in a loaded round.• Store primers and powder beyond the reach of children and away from heat, dampness, ope
LUBE DIE COMPATIBILITY CHARTUse the chart below to determine which Lube Die to use for aspecified caliber. If a number is not indicated, then a Lube D
308 Winchester 27.5mm x 54 French MAS 27.5mm x 55 Schmidt-Rubin —7.62 x 39mm .308/.311 37.62 x 54Rmm Russian .308/.311 —7.65 x 53mm Belgian Mauser 27.
Push the rubber seal ring up toexpose the fill hole.Fill the Lube Die with RCBS CaseLube-2.GENERAL INFORMATIONLubricating cases prior to resizing is a
die until the fill hole in the die is exposed. Insert the top of the Case Lube-2 bot-tle in the fill hole and give the bottle one good squeeze to forc
INSTALLING THE RELOADING DIE SETThe sizer die should be installed at station 2. The expander-decapping unitin the sizer die must be backed up so that
HELPFUL HINTS• Do not over-fill the lube retainer with case resizing lubricant. As ageneral guide, squeeze (with light pressure) the Case Lube-2bottle
Comentarios a estos manuales